Skip to content
Sewage overflow or burst main: your water company (Yarra Valley Water 13 27 62)Smell gas: the leak number on your gas bill · Danger: 000
Home / Rules

Rules

Plumbing compliance certificates in Victoria, and how to check a licence

Updated 16 October 2026 · 8 min read

Quick answer

In Victoria, a licensed plumber must give you a compliance certificate within five days for work covered by the certificate rules. The value trigger is $750 or more, with specified drain, gas and cooling-tower work covered regardless of value; the scope matters, not just the invoice amount.

About this pageWritten by the Plumbing, Answered editor, checked against the regulator and water company sources listed below on 16 October 2026. Not written by a licensed plumber.

When you get one

A licensed plumber must issue a compliance certificate, and lodge it with the regulator, for work that:

  • has a total value of $750 or more, including materials, appliances, labour and GST, regardless of who supplied the materials or appliances
  • constructs, installs or alters below-ground sanitary drains or associated gullies
  • installs, relocates or replaces a Type A gas-using appliance, or converts an appliance to a different gaseous fuel
  • installs, modifies or relocates consumer gas piping, with the BPC's stated exception for work on behalf of a gas company
  • carries out the specified construction, installation, alteration, relocation or replacement of a cooling tower system

You should receive the signed certificate within five days of the work being finished. Keep it.

Illustration: a plumber's hands holding a clipboard with a completely blank white sheet of paper, beside a newly soldered copper pipe joint, nothing written on the paper
Illustration of the job, not a real house.

What it protects

The certificate is the licensed plumber's certification of the work. BPC insurance guidance describes required cover and a six-year period after the certificate, with minimum domestic cover of $50,000 per claim or related series. Policy terms and the circumstances of a claim still matter; it is not a promise that every later problem will be paid for.

Licensed or registered?

Only a licensed plumber can issue a compliance certificate. A registered plumber must work under a licensed plumber's supervision, or limit themselves to work that does not need a certificate. Every licensed and registered plumber carries a photo ID card listing the classes of work they may do; you can ask to see it.

Who regulates plumbers

The Building and Plumbing Commission (BPC), which took over from the Victorian Building Authority, regulates plumbers and plumbing work in Victoria. Its online register lets you check a plumber's licence.

Common questions

When do you need a plumbing compliance certificate in Victoria?

The value trigger is $750 or more, with specified gas, below-ground sanitary-drain and cooling-tower work covered regardless of value. Check the exact scope with the licensed plumber and the regulator.

How do I check a plumber's licence?

Ask to see their photo ID card, and check their name or number on the Building and Plumbing Commission's online register.

The job description matters as much as the price

Describe the work you intend to have done before asking whether a certificate is required. “Fix the drain” could mean clearing a blockage, replacing a section of pipe or altering an associated gully. Those are different scopes. A short label on a quote can conceal the distinction that determines which rule applies.

Ask the licensed plumber to identify the applicable certificate requirement in writing. If the planned work changes after inspection, ask whether the certificate arrangements change too. Retain the updated scope with the quote so the final record describes the work actually performed.

This is particularly useful for a small invoice. A low price does not by itself establish that no certificate is needed, because the regulator lists specified work regardless of value. Conversely, the phrase “all drain work” is too broad to explain every case. Match the actual activity to the BPC's published categories instead of guessing from a general name.

If the case remains unclear, give the regulator the proposed scope and the plumber's explanation. A homeowner does not need to decide a technical classification from a blog summary. Preserving the detail makes the question answerable by someone who has the authority and expertise to resolve it.

Materials bought by the owner

A common source of confusion is an owner purchasing the appliance or fixtures separately. The labour invoice then looks much smaller than the complete project. Keep the receipts together and ask how the total value has been assessed, rather than assuming that only the final labour payment matters.

For an invented example, a homeowner supplies an appliance for $900 and receives a separate $400 installation quote. The point of the example is to show two documents describing one planned job; it is not a current installation price or a ruling about a particular contract. The plumber needs to assess the work against the applicable rules with the supplied item included where required.

Do not split a scope into smaller invoices simply to reach a preferred answer. Ask for a clear description of the actual work and its value. If several trades are involved, identify which person is responsible for each component and which completion documents each will provide.

Before accepting a plumbing quote

Check the practitioner's name and relevant licence classes, the proposed work, exclusions, appliances or materials and the expected completion documents. The business name on an advertisement is not enough to tell you which licensed person will certify the plumbing work.

If a registered plumber or apprentice will attend, ask who the supervising licensed plumber is and who will issue any required certificate. The BPC's guidance distinguishes registered and licensed practitioners. Avoid treating an assurance that someone is “in the trade” as a substitute for the relevant licence and responsibility.

Put the document question alongside the scope question: “What certificate will I receive for this work, and who will issue it?” That gives both parties a useful record before the job starts. It is clearer than raising the issue only when a future buyer, insurer or another tradesperson asks for the paperwork.

Keep the quote version you accepted. If a later message changes the appliance or adds work, save that too. A photograph of a finished fitting cannot explain every change that occurred during the job.

What to check when the document arrives

Compare the certificate with the work record. Check the property address, the issuing practitioner's details, the date and the described scope. Identify the appliance or part of the installation to which it relates. If something appears missing or wrong, ask the issuer to explain and correct the record through the appropriate process.

For an invented renovation, a certificate describing a hot water installation would not explain separate drainage alterations unless they are included in its scope. Ask the licensed plumber to identify how the work is recorded. Do not assume that one document automatically covers every trade and every stage of the renovation.

Keep a readable copy with the quote, invoice, manuals and any other completion documents. Give the files descriptive names with the property, work type and date. This is ordinary recordkeeping rather than a technical assessment of whether the work complies.

If you sell the home or need another repair later, those records can help an adviser understand what was done. They should still assess the relevant question themselves; a certificate is not a guarantee that every later alteration or unrelated part of the house complies.

If the certificate is missing

Contact the licensed plumber with the job address, completion date and scope, and ask for the required document or an explanation. Keep that request and the reply. A clear record is more useful than trying to reconstruct the conversation months later.

If the issue remains unresolved, use the BPC's current guidance for the next step and provide the evidence it asks for. The regulator can address a certificate or practitioner issue; this publication cannot look up a private job or issue a replacement document.

Avoid asking an unrelated plumber simply to sign off work they did not carry out or supervise. The BPC explains the circumstances in which a licensed plumber may issue a certificate. A new inspection or repair can involve a different scope and does not automatically recreate the original project's records.

If work has stopped partway through a job, preserve the current state and the documents describing what has been completed. Ask the relevant practitioner or regulator about the correct records for that situation rather than waiting until everything looks finished before raising the question.

Certificate, insurance and warranty are different records

A certificate identifies the licensed practitioner's certification. Insurance has its own cover, conditions and claim process. A manufacturer's warranty relates to the product under its terms. Keep all relevant documents, because one does not replace the others.

For a hypothetical water-heater problem, a leaking component might prompt questions about the appliance, installation or another part of the system. Record the symptom and ask the appropriate provider to investigate. A homeowner should not have to guess the final cause before preserving evidence or asking how to proceed.

Photographs, dates, invoices and the original certificate can help explain the history. Take photographs from a safe position and avoid opening equipment or disturbing a potentially dangerous installation to obtain evidence. If there is an immediate gas, electrical or sewage hazard, deal with the hazard through the proper emergency or licensed-trade contact first.

The BPC insurance page is the source for current cover and claim guidance. A statement about a minimum insurance amount is not a quote for the cost of repairing a home and does not determine the outcome of an individual claim.

A homeowner's completion folder

For a substantial plumbing project, assemble one folder containing the accepted scope, changes, practitioner details, relevant receipts, invoice, required certificate, appliance manual and maintenance instructions. Include photographs where they help identify the installation without exposing private information unnecessarily.

Write down unresolved questions before final handover. Examples include which appliance model was installed, where its isolation instructions are found, what maintenance the manufacturer requires and whom to contact about a defect. Ask the responsible practitioner to answer the questions that fall within their work.

The purpose is a usable record of the job. It does not turn the homeowner into an inspector or create a legal conclusion from a checklist. For a specific certificate dispute or interpretation of the rules, take the actual records to the BPC or an appropriately qualified adviser.

Why exactly $750 is included

Section 221ZH(1)(a) of the current Building Act 1993 uses an inclusive value trigger and allows the regulations to fix a higher amount. Regulation 47 of the current Plumbing Regulations 2018 fixes that amount at $750. Read together, the value trigger includes a job at exactly $750.

This matters if someone summarises the rule as applying only to jobs over $750. Obtain the complete job value and scope rather than assuming that an invoice at the threshold falls outside the requirement. The specified categories still matter independently of the value trigger.

Sources

  1. Building Act 1993, version 152 in force 16 September 2026, section 221ZH
  2. Plumbing Regulations 2018, version 010, regulation 47
  3. BPC, Plumbing compliance certificates, checked 16 October 2026
  4. BPC, Plumbing insurance, checked 16 October 2026
  5. Victorian Building Authority, Engaging a plumber
  6. Victorian Building Authority, Plumbing regulatory framework (the Building and Plumbing Commission)

Checked 16 October 2026. Rules and prices change; check with the regulator, your water company or a licensed plumber.

Who do I call?